The A&D Compressor Nebulizer is lightweight and has a low noise operation allowing for a very quiet and comfortable operation. Specifically designed for the treatment of upper and lower airways, allergies, colds, asthma and respiratory diseases.

Specifications:

• Low sound level 55 dB (A)
• Lightweight, compact design
• Simple one button operation
• Operating humidity 10% RH to 90% RH
• Small particle size approx. 3um MMAD
• Nebuliser rate 0.25ml/min
• Medication Capacity 2ml minimum - 6ml Maximum

Whats in the box:
Nebuliser Main Unit
Mouthpiece
Adult Mask and Children's Mask
Airtube
Nebulizer Cup
Handy Carrying Case
Power Cable

Directions for use:

• Place compressor on a stable, sturdy and flat surface so that the unit can be easily reached when you are seated.
• Pull out the power cord from the base of the device and make sure that the device is in the "Off" (O) position by pressing on the left side of switch.
• Plug power cord into a wall outlet.
• Connect one end of the nebulizer tubing into the air outlet connector.
• Add the prescribed solution through the opening on the cup using an eye dropper or pre-measured dose container. The "6cc" marking on the nebulizer cup is the maximum level. Medication cannot be filled beyond the maximum level.
• Assemble mouthpiece and insert it into the top of the nebulizer cup. If an aerosol mask is used, connect the bottom of the mask to the top of the nebulizer cup.
• Connect the tube to nebulizer air inlet connector.
• Turn the power on to start the unit.
• Initiate the treatment by placing the mouthpiece between the teeth. Inhale and exhale through the mouthpiece.
• If an aerosol mask is used, place the mask over the mouth and nose